How to Measure Recess Fit Full Blockout Cassette/Roller Blind Recess Fit 

Important steps to follow when measuring Recess Fit Full Blockout Cassette/ Roller Blind Recess Fit

Print out Blinds Downunder measuring form or download Blinds Downunder measuring form, which is editable for computer or devices, from our website to document blind measurements and details.

Use a metal tape measure. Make sure the tape measure is taught when taking measurements.

Always write down the width measurement first and then the drop measurement second on all blinds. Always document the smallest width and drop measurement. (*Note; Check for adequate fixings prior to ordering). 

Only write measurements down in millimetres.

Write down the preferred motor side on each individual blind.

Document the smallest measurement of three spot measurements for width and drop. Double check the top measurement where the cassette will be installed.

Always double check measurements with the measurements you have written down.

Watch for protruding door/window hardware that might interfere with Full Blockout Cassette/ Roller Blind operation. For the Full Blockout Cassette/ Roller Blind to fit in entire recess it requires 90mm to fit fully in recess. If your hood box is protruding out past the face of the recess end covers will be required, we deduct 2mm from width and drop of all recess fit blind for easier fitting. End cover are great if Cassette protrudes out of the recess and also to protect paint. You can make fine adjustments with a file onsite.Make sure there is good solid/flat fixing for tracks.